How To Clean Opal Ice Maker - foodlovestech

How To Clean Opal Ice Maker

Opal ice makers are usually pretty simple machines. They consist of a water tank, a pump, an ice cube tray, and a motor.

There are two main types of ice makers: those that use cold air to freeze the water and those that use electricity.

How To Clean Opal Ice Maker

Opal ice makers are great for making ice cubes at home. They are also very useful for making ice blocks or even crushed ice.

The problem is that they get dirty over time and become less effective.

In the following article, we are going to teach you how to clean your Opal ice maker.

We will also explain the tools you will need and how to approach the cleaning process.

What Is An Opal Ice Maker?

An opal ice machine is a type of ice maker that uses water from a tap or well instead of ice cubes.

This makes it much cheaper to operate than other types of ice makers. An opal ice machine is an appliance that produces large quantities of ice at a low cost.

The main advantage of using an opal ice machine is that it does not require electricity to run.

However, this does not mean that the ice machine does not come with its drawbacks.

For example, Opal ice makers can become very dirty, which can make the machine less efficient and unhygienic.

Fortunately, there are many ways that you can clean your Opal ice maker, with some of the best examples being found in the owner’s manual.

Why Should You Clean Your Opal Ice Maker?

Cleaning an opal ice maker will help prevent mold growth on the machine. Mold grows when there are high levels of moisture or humidity in the air.

If left untreated, mold can grow into a hard substance that can damage the machine.

How Often Should You Clean Your Opal Ice Maker?

Opal ice machines are great for keeping your drinks cold, but they also require regular maintenance. So how often should you clean them?

Well, Opal ice makers are made up of various components, which will all need to be cleaned.

However, some components will need to be cleaned more regularly than others, which can sometimes make the cleaning process a little confusing.

That is why we have decided to outline the different components of your ice maker and how often they should be cleaned in the section below:

  • Water reservoir – It is recommended that you clean your Opal ice maker weekly
  • Mineral deposits – You should descale your Opal ice maker at least once every 6 months
  • Sensors – It is recommended that you clean the sensors every 6 months
  • Exterior – Clean the ice maker’s exterior when needed

Before You Start

Opal ice machines are becoming increasingly common in bars and restaurants around the world.

They produce high-quality, crystal clear ice cubes at a fraction of the cost of other types of ice machines.

While cleaning your opal ice machine regularly is important, it’s also important to know how to properly care for it.

Here are some things to consider before cleaning your opal ice maker.

  • Before you can start cleaning your Opal ice maker, you must turn the machine off and unplug it from the wall. Once you have done this, allow the ice maker to rest for 1 hour before cleaning.
  • If your Opal ice maker has a filter, you will need to remove it and reinstall the reservoir screen. If you fail to do this, you will stop the circulation of water through the machine.
  • If there is a large buildup of limescale, you may be able to remove some of the unwanted debris with a pen or sharp object. While hard water residue may not always be visible it will still impede the machine’s ice production.
  • Before you can start cleaning your Opal ice maker, you must drain any water inside the machine using the drain tubes.

How To Clean An Opal Ice Maker

How To Clean An Opal Ice Maker

It is recommended that you clean your Opal ice maker weekly, as this will prevent the buildup of hard minerals and dirt.

Opal ice machines require the use of clean water. However, there are some owners who fill their ice machines with distilled water.

If you only use distilled water to make your ice, then you will only need to clean your ice maker once a month.

Now let’s take a look at the cleaning process…

  1. To begin cleaning your Opal ice maker, turn the machine on and slide the switch located on the back to the ‘clean’ position. This should make the display ring turn yellow.
  2. Next you will need to make your own cleaning solution. This can be done by combining five cups of water with a teaspoon of household bleach.
  3. Once you have made the cleaning solution, pour it into the water reservoir on the back of the machine.
  4. Touch the display button and start the cleaning process – this will make the light spin and the water circulate in the reservoir.
  5. After three minutes, the water will stop spinning and the light on the display will begin to pulse.
  6. When this happens, you will need to drain the Opal by unhooking the top of the drain hoses and allowing them to drain into a sink or bucket.
  7. Remove the plugs and let the water completely drain.
  8. Once the water stops draining you can re-insert the drain plugs.
  9. Next, take five cups of fresh water and add them to the water reservoir. When you have done this, press the button and allow the rinse cycle to do its job.
  10. Repeat steps 5 – 9 two more times while making sure to add fresh water to the reservoir with each rinse.
  11. When the ice machine is clean, replace the drain tubes at the back of the unit.
  12. Once everything has been completed, you can slide the switch back to ‘Ice’ mode.

How To Descale Opal Ice Maker

It is recommended that you descale your Opal ice maker once every 6 months, as this will help to break down any hard minerals that have built up in the machine.

Opal ice machines require the use of clean water. However, there are some owners who fill their ice machines with distilled water.

If you only use distilled water to make your ice, then you may not need to remove the mineral deposits.

Now let’s take a look at how to descale your Opal ice maker…

  1. Fill the water reservoir to the max line with white vinegar and run up to three cleaning cycles.
  2. Leave the vinegar in the machine for 18 hours and place a vinegar-soaked cloth on the ice chute to dissolve any mineral buildup.
  3. Clean the sensors using vinegar and then wipe them down with clean water. When you have drained the vinegar, run three rinse cycles using clean water each time.

Final Thoughts

While cleaning an Opal ice maker may sound complicated, the process can be completed using settings found on the machine itself.

Just make sure to maintain your ice maker’s upkeep and you will be able to avoid mineral deposits and unwanted debris.

Laz Ball
Latest posts by Laz Ball (see all)